One of the most troublesome areas of pavement maintenance today is the repair of reflective and fatigue cracking. When allowed to advance untreated, structural repairs will be required which are not only more expensive but disruptive to traffic.

After many years of intensive research & development, Recessed Fibrescreed has been perfected as an economic and efficient solution to these problems.

Recessed Fibrescreed 5-15 mm

Existing Overlay

Existing Concrete Pavement

Sub-base

Recessed Fibrescreed 5-15 mm

Existing Overlay

Existing lean mix base

Sub-base

INSTALLATION TECHNIQUE

The defective surfacing is mechanically milled to the required depth. The recess is then thoroughly cleaned and dried with the hot compressed air.

Hot Fibrescreed compound is then immediately applied to the recess finishing flush with the surrounding surface. Finally, the treated area is dressed with a  high P.S.V. aggregate to provide good skid resistance.

[back to top]