The previous expansion joint system must be removed to a depth which will allow the Fibrejoint system to be installed.

Saw cut the perimeter of the joint to be repaired to create a block-out. Remove all material between the joint block-out, including the wearing surface, riser bars, and any old expansion material.  Damaged concrete on the joint must be removed.

The area is cleaned and dried and the heat-resistant backer rod is installed.

A coating of the mastic asphalt is applied to form a waterproof seal.  The deflection plate is centered while the binder is elevated in temperature.

One and one half inch layers of binder and aggregate are applied until level with the surface.

A final layer of material is applied with a crushed topping stone to provide a tack-free surface.